.. This work is licensed under a .. Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 .. _xacml-s3p-label: .. toctree:: :maxdepth: 2 ########################## Policy XACML PDP S3P Tests ~~~~~~~~~~~~~~~~~~~~~~~~~~ Both the Performance and the Stability tests were executed by performing requests against Policy components installed in Kubernetes environment. These tests were all performed on a Ubuntu VM with 32GB of memory, 16 CPU and 100GB of disk space. Policy XACML PDP Deployment +++++++++++++++++++++++++++ In an effort to allow the execution of the s3p tests to be as close to automatic as possible, a script will be executed that will perform the following: - Install of a microk8s kubernetes environment - Bring up the policy components - Checks that the components are successfully up and running before proceeding - Install Java 17 - Install Jmeter locally and configure it - Specify whether you want to run stability or performance tests The remainder of this document outlines how to run the tests and the test results Common Setup ++++++++++++ The common setup for performance and stability tests is now automated - being carried out by a script in- **testsuites/run-s3p-test.sh**. Clone the policy-xacml-pdp repo to access the test scripts .. code-block:: bash git clone https://gerrit.onap.org/r/policy/xacml-pdp xacml-pdp Stability Test of Policy XACML PDP ++++++++++++++++++++++++++++++++++ Test Plan --------- The 24 hours stability test ran the following steps. - Healthcheck, 2 simultaneous threads - Decisions, 2 simultaneous threads, each running the following tasks in sequence: - Monitoring Decision - Monitoring Decision, abbreviated - Naming Decision - Optimization Decision - Default Guard Decision (always "Permit") - Frequency Limiter Guard Decision - Min/Max Guard Decision This runs for 24 hours. Test results are present in the **testsuites/automated-performance/s3pTestResults.jtl** file and in **/tmp/** directory. Logs are present for jmeter in **testsuites/automated-performance/jmeter.log** and **testsuites/automated-performance/nohup.out** Run Test -------- The code in the setup section also serves to run the tests. Just one execution needed to do it all. .. code-block:: bash bash run-s3p-test.sh run stability Once the test execution is completed, the results are present in the **automate-performance/s3pTestResults.jtl** file. This file can be imported into the Jmeter GUI for visualization. The below results are tabulated from the GUI. Test Results ------------ **Summary** Stability test plan was triggered for 24 hours. **Test Statistics** ======================= ================= ======================== ========================= **Total # of requests** **Error %** **Average Latency (ms)** **Measured requests/sec** ======================= ================= ======================== ========================= 54472562 0.00 % 5 ms 630.1 ms ======================= ================= ======================== ========================= **JMeter Results** .. image:: xacml-s3p-results/s3p-stability-xacml.png **Policy component Setup** ============================================== ==================================================================== ============================================= **NAME** **IMAGE** **PORT** ============================================== ==================================================================== ============================================= zookeeper-deployment-7ff87c7fcc-fbsfb confluentinc/cp-zookeeper:latest 2181/TCP kafka-deployment-5c87d497b-m8s2g confluentinc/cp-kafka:latest 9092/TCP policy-drools-pdp-0 nexus3.onap.org:10001/onap/policy-pdpd-cl:2.1.3-SNAPSHOT 6969/TCP 9696/TCP policy-apex-pdp-0 nexus3.onap.org:10001/onap/policy-apex-pdp:3.1.3-SNAPSHOT 6969/TCP policy-distribution-f48bff778-48pm2 nexus3.onap.org:10001/onap/policy-distribution:3.1.3-SNAPSHOT 6969/TCP policy-models-simulator-6947667bdc-wcd9r nexus3.onap.org:10001/onap/policy-models-simulator:3.1.3-SNAPSHOT 6666/TCP 6680/TCP 6668/TCP 6669/TCP 6670/TCP policy-clamp-ac-http-ppnt-7d747b5d98-wmr5n nexus3.onap.org:10001/onap/policy-clamp-ac-http-ppnt:7.1.3-SNAPSHOT 8084/TCP policy-clamp-ac-k8s-ppnt-6bbd86bbc6-vnvx6 nexus3.onap.org:10001/onap/policy-clamp-ac-k8s-ppnt:7.1.3-SNAPSHOT 8083/TCP policy-clamp-ac-pf-ppnt-5fcbbcdb6c-k2cbk nexus3.onap.org:10001/onap/policy-clamp-ac-pf-ppnt:7.1.3-SNAPSHOT 6969/TCP policy-clamp-ac-sim-ppnt-97f487577-m2zjr nexus3.onap.org:10001/onap/policy-clamp-ac-sim-ppnt:7.1.3-SNAPSHOT 6969/TCP policy-clamp-runtime-acm-66b5d6b64-l6dpq nexus3.onap.org:10001/onap/policy-clamp-runtime-acm:7.1.3-SNAPSHOT 6969/TCP mariadb-galera-0 docker.io/bitnami/mariadb-galera:10.5.8 3306/TCP prometheus-f66f97b6-kkmpq nexus3.onap.org:10001/prom/prometheus:latest 9090/TCP policy-api-7f7d995b4-2zhnw nexus3.onap.org:10001/onap/policy-api:3.1.3-SNAPSHOT 6969/TCP policy-pap-f7899d4cd-mfrtp nexus3.onap.org:10001/onap/policy-pap:3.1.3-SNAPSHOT 6969/TCP policy-xacml-pdp-6c86f85ff6-6qzgf nexus3.onap.org:10001/onap/policy-xacml-pdp:3.1.2 6969/TCP ============================================== ==================================================================== ============================================= .. Note:: .. container:: paragraph There were no failures during the 24 hours test. The XACML PDP offered very good performance with JMeter for the traffic mix described above. The average transaction time is insignificant. Performance Test of Policy XACML PDP ++++++++++++++++++++++++++++++++++++ Introduction ------------ Performance test of acm components has the goal of testing the min/avg/max processing time and rest call throughput for all the requests with multiple requests at the same time. Setup Details ------------- We can setup the environment and execute the tests like this from the **xacml-pdp/testsuites** directory Test Plan --------- Performance test plan is the same as the stability test plan above except for the few differences listed below. - Increase the number of threads up to 10 (simulating 10 users' behaviours at the same time). - Reduce the test time to 20 minutes. The performance tests runs the following, all in parallel: - Healthcheck, 10 simultaneous threads - Decisions, 10 simultaneous threads, each running the following in sequence: - Monitoring Decision - Monitoring Decision, abbreviated - Naming Decision - Optimization Decision - Default Guard Decision (always "Permit") - Frequency Limiter Guard Decision - Min/Max Guard Decision When the script starts up, it uses policy-api to create, and policy-pap to deploy the policies that are needed by the test. It assumes that the "naming" policy has already been created and deployed. Once the test completes, it undeploys and deletes the policies that it previously created. Run Test -------- The code in the setup section also serves to run the tests. Just one execution needed to do it all. .. code-block:: bash bash run-s3p-test.sh run performance Once the test execution is completed, the results are present in the **automate-performance/s3pTestResults.jtl** file and in **/tmp/** directory. This file can be imported into the Jmeter GUI for visualization. The below results are tabulated from the GUI. Test Results ------------ **Summary** The test was run for 20 minutes with 10 users (i.e., threads), with the following results: **Test Statistics** ======================= ================= ======================== ========================= **Total # of requests** **Error %** **Average Latency (ms)** **Measured requests/sec** ======================= ================= ======================== ========================= 888047 0.00 % 25 ms 723.2 ms ======================= ================= ======================== ========================= .. image:: xacml-s3p-results/s3p-perf-xacml.png