.. This work is licensed under a .. Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 CLAMP Policy Participant Smoke Tests ------------------------------------ 1. Introduction *************** The Smoke testing of the policy participant is executed in a local CLAMP/Policy environment. The CLAMP-Controlloop interfaces interact with the Policy Framework to perform actions based on the state of the policy participant. The goal of the Smoke tests is the ensure that CLAMP Policy Participant and Policy Framework work together as expected. 2. Setup Guide ************** This section will show the developer how to set up their environment to start testing in GUI with some instruction on how to carry out the tests. There are a number of prerequisites. Note that this guide is written by a Linux user - although the majority of the steps show will be exactly the same in Windows or other systems. 2.1 Prerequisites ================= - Java 11 - Maven 3 - Git - Refer to this guide for basic environment setup `Setting up dev environment `_ 2.2 Assumptions =============== - You are accessing the policy repositories through gerrit - You are using "git review". The following repositories are required for development in this project. These repositories should be present on your machine and you should run "mvn clean install" on all of them so that the packages are present in your .m2 repository. - policy/parent - policy/common - policy/models - policy/clamp - policy/docker - policy/gui - policy/api In this setup guide, we will be setting up all the components technically required for a working convenient dev environment. 2.3 Setting up the components ============================= 2.3.1 MariaDB Setup ^^^^^^^^^^^^^^^^^^^ We will be using Docker to run our mariadb instance. It will have a total of two databases running in it. - controlloop: the runtime-controlloop db - policyadmin: the policy-api db The easiest way to do this is to perform a small alteration on an SQL script provided by the clamp backend in the file "runtime/extra/sql/bulkload/create-db.sql" .. code-block:: mysql CREATE DATABASE `controlloop`; USE `controlloop`; DROP USER 'policy'; CREATE USER 'policy'; GRANT ALL on controlloop.* to 'policy' identified by 'P01icY' with GRANT OPTION; CREATE DATABASE `policyadmin`; USE `policyadmin`; DROP USER 'policy_user'; CREATE USER 'policy_user'; GRANT ALL on controlloop.* to 'policy_user' identified by 'policy_user' with GRANT OPTION; FLUSH PRIVILEGES; Once this has been done, we can run the bash script provided here: "runtime/extra/bin-for-dev/start-db.sh" .. code-block:: bash ./start-db.sh This will setup the two databases needed. The database will be exposed locally on port 3306 and will be backed by an anonymous docker volume. 2.3.2 DMAAP Simulator ^^^^^^^^^^^^^^^^^^^^^ For convenience, a dmaap simulator has been provided in the policy/models repository. To start the simulator, you can do the following: 1. Navigate to /models-sim/policy-models-simulators in the policy/models repository. 2. Add a configuration file to src/test/resources with the following contents: .. code-block:: json { "dmaapProvider":{ "name":"DMaaP simulator", "topicSweepSec":900 }, "restServers":[ { "name":"DMaaP simulator", "providerClass":"org.onap.policy.models.sim.dmaap.rest.DmaapSimRestControllerV1", "host":"localhost", "port":3904, "https":false } ] } 3. You can then start dmaap with: .. code-block:: bash mvn exec:java -Dexec.mainClass=org.onap.policy.models.simulators.Main -Dexec.args="src/test/resources/YOUR_CONF_FILE.json" At this stage the dmaap simulator should be running on your local machine on port 3904. 2.3.3 Policy API ^^^^^^^^^^^^^^^^ In the policy-api repo, you should find the file "src/main/resources/etc/defaultConfig.json". This file must be altered slightly - as below with the restServerParameters and databaseProviderParameters shown. Note how the database parameters match-up with what you setup in Mariadb: .. code-block:: json { "restServerParameters": { "host": "0.0.0.0", "port": 6970, "userName": "healthcheck", "password": "zb!XztG34", "prometheus": true, "https": false, "aaf": false }, "databaseProviderParameters": { "name": "PolicyProviderParameterGroup", "implementation": "org.onap.policy.models.provider.impl.DatabasePolicyModelsProviderImpl", "databaseDriver": "org.mariadb.jdbc.Driver", "databaseUrl": "jdbc:mariadb://mariadb:3306/policyadmin", "databaseUser": "policy_user", "databasePassword": "policy_user", "persistenceUnit": "PolicyMariaDb" }, } Next, navigate to the "/main" directory. You can then run the following command to start the policy api: .. code-block:: bash mvn exec:java -Dexec.mainClass=org.onap.policy.api.main.startstop.Main -Dexec.args=" -c ../packages/policy-api-tarball/src/main/resources/etc/defaultConfig.json" 2.3.4 Policy PAP ^^^^^^^^^^^^^^^^ In the policy-pap repo, you should find the file 'main/src/test/resources/parameters/PapConfigParameters.json'. This file may need to be altered slightly as below: .. code-block:: json { "name": "PapGroup", "restServerParameters": { "host": "0.0.0.0", "port": 6968, "userName": "healthcheck", "password": "zb!XztG34", "https": false }, "pdpParameters": { "heartBeatMs": 60000, "updateParameters": { "maxRetryCount": 1, "maxWaitMs": 30000 }, "stateChangeParameters": { "maxRetryCount": 1, "maxWaitMs": 30000 } }, "databaseProviderParameters": { "name": "PolicyProviderParameterGroup", "implementation": "org.onap.policy.models.provider.impl.DatabasePolicyModelsProviderImpl", "databaseDriver": "org.mariadb.jdbc.Driver", "databaseUrl": "jdbc:mariadb://localhost:3306/policyadmin", "databaseUser": "policy_user", "databasePassword": "policy_user", "persistenceUnit": "PolicyMariaDb" }, "topicParameterGroup": { "topicSources" : [{ "topic" : "POLICY-PDP-PAP", "servers" : [ "localhost:3904" ], "topicCommInfrastructure" : "dmaap" }], "topicSinks" : [{ "topic" : "POLICY-PDP-PAP", "servers" : [ "localhost:3904" ], "topicCommInfrastructure" : "dmaap" },{ "topic" : "POLICY-NOTIFICATION", "servers" : [ "localhost:3904" ], "topicCommInfrastructure" : "dmaap" }] }, "healthCheckRestClientParameters":[{ "clientName": "api", "hostname": "policy-api", "port": 6968, "userName": "healthcheck", "password": "zb!XztG34", "useHttps": false, "basePath": "policy/api/v1/healthcheck" }, { "clientName": "distribution", "hostname": "policy-distribution", "port": 6970, "userName": "healthcheck", "password": "zb!XztG34", "useHttps": false, "basePath": "healthcheck" }] } Next, navigate to the "/main" directory. You can then run the following command to start the policy pap .. code-block:: bash mvn -q -e clean compile exec:java -Dexec.mainClass="org.onap.policy.pap.main.startstop.Main" -Dexec.args="-c /src/test/resources/parameters/PapConfigParameters.json" 2.3.5 Controlloop Runtime ^^^^^^^^^^^^^^^^^^^^^^^^^ To start the controlloop runtime we need to go the "runtime-controlloop" directory in the clamp repo. There is a config file that is used, by default, for the controlloop runtime. That config file is here: "src/main/resources/application.yaml". For development in your local environment, it shouldn't need any adjustment and we can just run the controlloop runtime with: .. code-block:: bash mvn spring-boot:run 2.3.6 Controlloop Policy Participant ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ To start the policy participant we need to go to the "participant-impl/participant-impl-policy" directory in the clamp repo. There is a config file under "src/main/resources/config/application.yaml". For development in your local environment, we will need to adjust this file slightly: .. code-block:: yaml server: port: 8082 participant: pdpGroup: defaultGroup pdpType: apex policyApiParameters: clientName: api hostname: localhost port: 6970 userName: healthcheck password: zb!XztG34 https: true allowSelfSignedCerts: true policyPapParameters: clientName: pap hostname: localhost port: 6968 userName: healthcheck password: zb!XztG34 https: true allowSelfSignedCerts: true intermediaryParameters: reportingTimeIntervalMs: 120000 description: Participant Description participantId: name: org.onap.PM_Policy version: 1.0.0 participantType: name: org.onap.policy.controlloop.PolicyControlLoopParticipant version: 2.3.1 clampControlLoopTopics: topicSources: - topic: POLICY-CLRUNTIME-PARTICIPANT servers: - ${topicServer:localhost} topicCommInfrastructure: dmaap fetchTimeout: 15000 topicSinks: - topic: POLICY-CLRUNTIME-PARTICIPANT servers: - ${topicServer:localhost} topicCommInfrastructure: dmaap Navigate to the participant-impl/particpant-impl-policy/main directory. We can then run the policy-participant with the following command: .. code-block:: bash mvn spring-boot:run -Dspring-boot.run.arguments="--server.port=8082 --topicServer=localhost" 3. Testing Procedure ==================== 3.1 Testing Outline ^^^^^^^^^^^^^^^^^^^ To perform the Smoke testing of the policy-participant we will be verifying the behaviours of the participant when the control loop changes state. The scenarios are: - UNINITIALISED to PASSIVE: participant creates policies and policyTypes specified in the ToscaServiceTemplate using policy-api - PASSIVE to RUNNING: participant deploys created policies specified in the ToscaServiceTemplate - RUNNING to PASSIVE: participant undeploys policies which have been deployed - PASSIVE to UNINITIALISED: participant deletes policies and policyTypes which has been created 3.2 Testing Steps ^^^^^^^^^^^^^^^^^ Creation of Controlloop: ************************ A Control Loop is created by commissioning a Tosca template with Control loop definitions and instantiating the Control Loop with the state "UNINITIALISED". Using postman, commision a TOSCA template and instantiate using the following template: :download:`Tosca Service Template ` :download:`Instantiate Controlloop ` To verify this, we check that the Controlloop has been created and is in state UNINITIALISED. .. image:: images/pol-part-controlloop-creation-ver.png Creation of policies and policyTypes: ************************************* The Controlloop STATE is changed from UNINITIALISED to PASSIVE using postman: .. code-block:: json { "orderedState": "PASSIVE", "controlLoopIdentifierList": [ { "name": "PMSHInstance0", "version": "1.0.1" } ] } This state change will trigger the creation of policies and policyTypes using the policy-api. To verify this we will check, using policy-api endpoints, that the "Sirisha" policyType, which is specified in the service template, has been created. .. image:: images/pol-part-controlloop-sirisha-ver.png We can also check that the pm-control policy has been created. .. image:: images/pol-part-controlloop-pmcontrol-ver.png Deployment of policies: *********************** The Controlloop STATE is changed from PASSIVE to RUNNING using postman: .. code-block:: json { "orderedState": "RUNNING", "controlLoopIdentifierList": [ { "name": "PMSHInstance0", "version": "1.0.1" } ] } This state change will trigger the deployment of the policies specified in the ToscaServiceTemplate. To verify this, we will check that the apex pmcontrol policy has been deployed to the defaultGroup. We check this using pap: .. image:: images/pol-part-controlloop-pmcontrol-deploy-ver.png Undeployment of policies: ************************* The Controlloop STATE is changed from RUNNING to PASSIVE using postman: .. code-block:: json { "orderedState": "PASSIVE", "controlLoopIdentifierList": [ { "name": "PMSHInstance0", "version": "1.0.1" } ] } This state change will trigger the undeployment of the pmcontrol policy which was deployed previously. To verifiy this we do a PdpGroup Query as before and check that the pmcontrol policy has been undeployed and removed from the defaultGroup: .. image:: images/pol-part-controlloop-pmcontrol-undep-ver.png Deletion of policies and policyTypes: ************************************* The Controlloop STATE is changed from PASSIVE to UNINITIALISED using postman: .. code-block:: json { "orderedState": "UNINITIALISED", "controlLoopIdentifierList": [ { "name": "PMSHInstance0", "version": "1.0.1" } ] } This state change will trigger the deletion of the previously created policies and policyTypes. To verify this, as before, we can check that the Sirisha policyType is not found this time and likewise for the pmcontrol policy: .. image:: images/pol-part-controlloop-sirisha-nf.png .. image:: images/pol-part-controlloop-pmcontrol-nf.png